ensures that contractors and suppliers comply with the requirements of the Project Quality Assurance Plan and (or) the requirements of their own approved quality management plans and programs, depending on the circumstances ensures quality management activities related to the handling of material assets, including preservation coordinates the development and implementation of plans, procedures and processes for procurement and materials management, working with stakeholders and third-party business partners conducts inspections, draws up non-conformity reports liaises with the site construction team and business partners, operations department, suppliers, procurement groups, cargo handling, contracts department, warehouse, central quality group and design reliability, including quality of materials, welding, insulation works, non-destructive testing

High pressure low pressure project (HPLP)

 carry out work with pipelines of HVAC systems and pressurized heating systems using welding production standards  carry out certification of boilers under pressure  carry out work on HVAC ductwork in accordance with the requirements of the National Association of Sheet Metal and Air Conditioning Contractors or DW 144  monitor weld maps, fill in quality control certificates in the dossier of records and mark drawings of records

 Visual Weld Inspection.  Review non-destructive evaluation results to verify compliance with contractual requirements.  Verify that the site non-destructive evaluation program implemented on site complies with the codes, standards, and specifications.  Ensure that documentation is being completed, signed off, and compiled as the work progresses so as to support turnover and record retention activities at the project site.  Stay current with technical developments in area of expertise through continuing education and is aware of changes to codes, standards, and specifications that may affect project work.  Provide coaching and mentoring of Business partners Inspectors.  Organize and prioritize a variety of assignments and multiple tasks in an effective and timely manner, set priorities, and meet deadlines.  Plan and organize own work assignments, as well as carry out tasks from management staff.  Maintain compliance with all applicable policies, procedures, and global standards.  Adhere to and support TCO Health, Safety & Environmental and Sustainability Policies.  Fully support and participate in all Injury and Incident Free (IIF) initiatives.  Perform daily verification of all activities related to welding.  Perform any other duties as assigned.

 to carry out a general inspection of the welding inspectors, quality control inspectors for their compliance with the requirements of the Client and international, Kazakhstan norms and standards (API, AWS, ASME), and Project work instructions;  to supervise inspections, reports and the documentation issued by inspectors and collect and file the required records;  prepare inspection test plan (ITP) by Civil, Welding, NDE, Coating, E&I activities.  prepare data for creating a weekly, monthly and annual reports;  to evaluate the qualifications of welders;  responsible for the safety, accounting and issuance of material values of the Site;  to deal with the issues of bundling and purchasing the necessary tools for the Site;  to participate in negotiations with the inspectors of the Client and justify their decision.  to prepare drawings for production.  to control process of planning and production on the Site.

Organisation and control of inspections of civil, welding, coating and E&I activities.

Organization and planing of work welding and quality control inspectors at welding of technological pipeline on Integrated gaz-chemical complex Atyrau

 to carry out a general inspection of the welding inspectors, quality control inspectors and coating inspectors for their compliance with the requirements of the Client and international norms and standards, international specifications and specifications, and Project work instructions;  prepare data for creating a weekly, monthly and annual reports;  responsible for the safety, accounting and issuance of material values of the department;  to deal with the issues of bundling and purchasing the necessary tools for the department;  to participate in negotiations with the inspectors of the Client and justify their decision.

 to carry out a general control of welding inspectors and quality control inspectors for their compliance with the requirements of the Client and international norms and standards, international specifications and specifications, and project design instructions;  develop work instructions of processes;  keep the general statistics of welding and welders, send the results of the past day;  to consult the inspectors on controversial issues;  monitor and certify welding procedures and welders;  check the results of non-destructive testing.

 to prepare reports for the QC Lead of Project and to be responsible for carrying out or confirming inspections for the types of work and documenting the results in accordance with project procedures;  to carry out or to confirm timely inspections of production druring works and upon works completion, installation and testing, in order to ensure compliance with project design specifications and drawings;  to provide timely inspections to provide compliance with the project design specifications and drawings, as prescribed by the Project Inspection and Testing Plan and quality control documents;  to provide timely completeness and correctness of construction quality checks for subsequent transfer;  to train in order to clearly understand and fulfill the requirements of the Project in the quality field. To prepare or to confirm inspections reports of production;  to provide development and publication of non-conformance reports and oversight reports to determine and implement ways to resolve the contradictions observed during the production.

 to provide together with the company top management the continual functioning of the quality system management (QSM), its continuous improvement and upgrade; to manage the work of the departments in the system of defect-free products manufacturing;  to participate in the development and implementation of activities and programs to improve the products quality (works, services), the introduction and improvement of QSM, standards and normative, regulating the products quality (works, services), the most sophisticated control methods, providing mechanization and automation of control operations;  to improve metrological provision of methods for measurement, control and testing;  to inform employees about management policy in the field of quality, goals and objectives of the enterprise regarding needs and expectations of consumers;  to participate in acceptance, periodic and type testing of products;  to make final decision for finished products acceptance and rejection in cases of disagreement between employees of the quality department and production shops.

 to prepare reports for the Leading Engineer / Quality Group Inspector and to be responsible for carrying out or confirming inspections for the types of work of the Contractors and documenting the results in accordance with project procedures;  to carry out or to confirm timely inspections of Contractors druring works and upon works completion, installation and testing, in order to ensure compliance with project design specifications and drawings;  to provide timely inspections of contractors and TCO to provide compliance with the project design specifications and drawings, as prescribed by the Project Inspection and Testing Plan and construction quality control documents;  to provide timely completion of construction quality audits to cooperate submittance of the Project Completion Group for collection in the System File, as well as to ensure completeness and correctness of construction quality checks for subsequent transfer;  daily cooperation with superintendents of construction sites to determine requirements and ensure coverage of inspections and completion of construction checks and quality to meet site requirements;  to train in order to clearly understand and fulfill the requirements of the Project in the quality field. To prepare or to confirm inspections reports of contractors;  to provide development and publication of non-conformance reports and oversight reports to determine and implement ways to resolve the contradictions observed during the construction phase .

- to provide performance of site production tasks, compliance with the established technology of products manufacturing, work carrying out, appropriate output ; - to organize timely preproduction, full loading and uninterrupted operation of equipment; - to analyze the results of site production activity, reasons that cause equipment downtime, as well as to participate in the development and implementation of measures to eliminate shortcomings determined .

- to carry out quality control and products completeness; to control compliance with technical requirements, design and technological documentation; to prevent delivery of non-conforming products which do not comply with the requirements of standards, design and technological documentation, delivery terms and contracts, as well as incomplete products as well as production discipline building and responsibility increase for products quality; - to provide the continual functioning of the quality system management (QSM), its continuous improvement and upgrade; - to participate in the planning of products quality improving (works, services), to meet the current level of science and technology development in accordance with its technical and economic indicators; - on the basis of the analysis of production progress, test results, operating experience and in accordance with the needs of consumers, together with technical services and production units, to carry out systematic work to improve quality and reliability of products; - to provide control at all manufacturing stages of heat exhanging and energetic equipment (machining, welding, heat treatment, paint coating), tests of finished products and registration of documents certifying the quality of products in accordance with the drawings, standards and specifications (W-ST-2006 rev.2, W-ST-2004 rev.3, COM-SU-4793-ТСО, COM-SU-5191-ТСО) (works, services), etc.

- to carry out quality control and products completeness; to control compliance with technical requirements, design and technological documentation; to prevent delivery of non-conforming products which do not comply with the requirements of standards, design and technological documentation, delivery terms and contracts, as well as incomplete products; - to prepare opinion letters on the quality of incoming raw materials, materials, semi-finished products, components, standards, technical conditions and to draw up documents for claims to suppliers

- to carry out works on improving the technology of parts manufacturing in order to increase labor productivity, improve the quality and reduce the labor content during product manufacturing, making its suggestions on changing the technical processes in the established manner on continuing basis; - to classify an order of work performance and the operational route for products (parts, assemblages); - to introduces new technological processes, special tools and adaptations after pilot batch.

- to make additions and changes to the current standards; to annul the abolished standards and other standardization documents, to carry out registration, acquisition, storage of control copies; - to perform metrological control of the correct assembling, installation, use and condition of measuring instruments in organization departments; - to provide timely delivery of initial samples of measuring instruments for state verification and repair; to organize the receipt and delivery of tested measuring instruments; to prepare verification results and compiles relevant technical documentation.

- to carry out quality control and products completeness; to control compliance with technical requirements, design and technological documentation; to prevent delivery of non-conforming products which do not comply with the requirements of standards, design and technological documentation, delivery terms and contracts, as well as incomplete products; - to prepare opinion letters on the quality of incoming raw materials, materials, semi-finished products, components, standards, technical conditions and to draw up documents for claims to suppliers

Finance

Standardization, metrology and certification

AWS (American Welding Society), Certifies that Welding Inspector. Certificate number 19050791

PE " Non-destructive testing certification center", II level: VT, UT, RT

«Kran Serves LTD» LLP, Specialist in welding production Certificate level III. certificate № 128

SEFtec, Basic H2S training

“Quality management center”, Atyrau, ISO 9001:2015 Requirements. Quality Management System Internal Auditor

“Quality management center”, Atyrau, ISO 14001:2015 and ISO 45001:2018 Requirements. IMS Internal Auditor

BUREAU VERITAS Certification, Almaty., “PR238: QMS ISO 9001:2015 Lead Auditor training Course.” Course № 17929 (CQI and IRCA). Certificate №: 19/KZ/1020456/17156.

OPITO, Safe Driving at Work Training OPITO course code: 9076. Certificate №81579076200517004.