Responsible for proper positioning the vessel and all the in-sea navigation equipment. Using Searay 300 OBC cable with receivers each 25m sequence deploying with 12m threshold at 120m water depth. USBL system highly integrated to achieve more accuracy during cable deployment to track initial beacon landing at the bottom of the sea. This gives an idea whether to correct the speed of deployment or take an action concerning cross or in line offsets.

Manually deployed seismic equipment has its own unique way to handle with, as man power is used to fit sensors in position Buzzer signal has been involved to initiate a signal for sensors releasing or FDUs into the water at 48m distance between, was in charge of proper fitting and team coordination on board

Maintaining the excellence in proper FDU seismic sensor positioning at the sea bottom , Moving back for Sepat oilfield to run a 3D survey for Petronas using same sercel 428 ocean bottom four-component cable finishing up this block for the year of 2012 Was involved in Demobilization of Navigational equipment during a stay at Loyang in Singapore rigging off navigational equipment from seismic vessel and packing and patching them up ( Veripos GPS receivers, ) and preparing for the next project

Maintaining the excellence in proper FDU seismic sensor positioning at the sea bottom , laying out the cable without any sufficient shifts from pre plot receivers cause of lack in sea current at 0.2 knots that allowed to have an advantage in deployment

In charge of navigational equipment rig up for Cable, Acoustic and Gun boats during stay at Keppel Shipyard in Singapore to prepare for MYS3584 crew Running up first one at Bujang block using ION concept Gator II 2012 Multi vessel satellite conducted Nav software at the first time Maintaining the excellence in proper FDU seismic sensor positioning at the sea bottom , laying out the cable respecting more accuracy to meet the preset threshold at 12.5 m calculating the depth and sea current that usually ranged up to 2 knots at the sea bottom with offset in and cross up to 90meters from pre plot position of receivers leading the production at the highest flow

Maintaining the excellence in proper FDU seismic sensor positioning at the sea bottom , Using Sercel seabed four-component SeaRay® 428 equipment laying out the one constantly conducting it with ‘’baillonnette ‘’ deployment cause of bunch of platform existence with depth at 75 meters and sea bottom current up to 2.5 – 3 knots whereas threshold was 12.5 meters + 10% out of setting bins off Was also in charge to train local people for navigational intricacies

Acoustic boat, Gun boat navigation system operation, setting of line coordinates, troubleshooting, monitoring seismic jet boat to keep straight in line while pinging or acoustic data acquisition is being held. Setting up link connection between boats through Cisco Telemetry system, troubleshooting firmware for: GPS Trimble SPS receiver, Pacific Crest Differential station link with PDL radio modem W35, W2. Tide monitoring etc. Had a responsibility in NAV.dept for demobilization

May 2009 - June 2010, as Line Manager Seismic vessel and crew coordination, maintaining the excellence in good data acquisition. ✓ January 2009 - May 2009, as Seismic Engineer (Navigator) Seismic vessel navigation system operation, setting of line coordinates, troubleshooting, monitoring seismic vessel to keep straight in line while cable (seismic equipment) deployment. ✓ September 2008 - January 2009, as Navigator Seismic vessel navigation system monitoring ✓ May 2008 - September 2008, as Technical Interpreter Tool box meeting, daily HSE and Production meeting interpretation,

Geophysics, Bachelor in geophysics

N/A, Intepreter-translator