• Monitoring and validation all welding executed accordance with all relevant of procedures and inspection test plan. • Verify welding parameters and consumables during installation construction activities. • Verify welding specification procedures and welders’ qualifications. • Carry out visual inspections and issue relevant reports and NDT requests. • Orderly collect and check documents certifying tests, controls, and inspection documents, ensuring ha all welding, and testing related records reflect the As Built. • After completion of welding and NDT, verify control on the release of painting. • Test Pack Review and Witness Hydrotest Execution.

• Fit-up & weld visual inspection piping as per ANSI/ASME B31.3 • Visual weld joint testing: weld joints and used material mapping • Visual Inspection of welds, writing daily welding report. • Visual Inspection of copper pipes brazing joint and internal visual inspection by borescope. • Welder qualification test arrangements and witness as per ASME SEC.IX for piping. • Ensure welding as per approved welding procedure qualification and contractor deploys approved welders • Monitor storage, handling and backing welding consumables. Carry out material inspections and welding consumables at yard • Reviewing project drawings for any changes or updates P&ID, Isometric drawings. • Providing daily welding reports and NDT reports for data entry to NEWS Database • Preparation of a test package, a request for a hydro test permission. • Preparation NEWS clearance report for hydro testing. • Mechanical activities: hydrostatic, pneumatic/hydro test, Line-check, Reinstatement, Flange Management etc. • Witness hydro-testing of piping as per hydro test procedure. • Verification and validation before walkdown all check limit pipe line. • Verification all certificate gauge, host, manifolds and certificate of water test results. • Witness of hydro test of piping and pressure chart, pressure temperature and pump pressure. • Line flushing, air blowing; pressure testing, piping lay-up inspection, relief valve installation, re-instatement and final inspection for mechanical completion. • Prepare Non- Conformance Report (NCR) and initiate corrective Action for violation and out of Standard of Construction activities. • Ensure QA/QC Requirements as per Company's quality policy and approved quality plan • Making sure all the works are in comply in accordance with TCO code documents (specifications) Republic of Kazakhstan (Snip/ GOST), ASTM, ASME, API international standards.

• Quality control of welding, installation work • Reviewing project drawings for any changes or updates (P&ID, Isometric drawings) • Executing inspections on materials, equipment and construction/installation activities at site • Providing DWR and NDT reports for data entry to NEWS Database • Preparing hydro test package documentation and performing pipeline inspections • Verification of conformity of materials and their certificates for welding • Interfaces with the client representatives for quality inspection activities • Verification of certificates: welding equipment, welding consumables. Monitoring the implementation of approved procedures. • Inspection of welded joints at all levels of welding, based on ITP and international standards (ASME, ISO) • Verifying relevant Welder Qualifications, NDE Qualifications and updating Weld Logs • Conducting inspections to ensure all the welding activities are carried out in accordance with approved project specification and procedures • Material Receiving Inspection for Incoming materials such as Pipes, Flanges, Valves, Elbows, Gaskets, Stud bolts, and structural related Items, etc • Visual weld joint testing: weld joints and used material mapping • Visual Inspection of welds, writing daily welding report. • Witness of hydro test of piping and other different mechanical equipment’s, line reinstatement – valve installation and bolt torqueing inspections

Training courses in welding and practice Tig welding / GTAW, MMA / SMAW, MIG, MAG / FCAW Технология сварки. Сварочные чертежи. Обеспечения контроля качества при сварке. . Квалификационные испытания сварщиков. Международные стандарты в области сварки. Обучение стыковых швов на трубах в пространственных положениях 2G,5G,H-L045/6G Welding Technology. Welding Drawings. Quality control assurance in welding. Qualification tests of welders. International Welding Standards. Training of butt welds on pipes in spatial positions 2G, 5G, H-L045 / 6G

Контроль качества сварной конструкции и сварных стыков.Выявление и устранение причин нарушения технологических процессов.Контроль выполнения сварочных работ, соблюдения технологических процессов производства сварных конструкций.Выдача производственного задания и производственно-технологической документации бригаде и рабочим. Расстановка работников по рабочим местам.Контроль соблюдения требований охраны труда, производственной санитарии, промышленной, пожарной и экологической безопасности, правил внутреннего трудового распорядка. Проведение работ по совершенствованию организации сварочного производства, механизации и автоматизации сварочных процессов, рационализации. Оформление ежедневного отчета "DWR" DAILY WELDING REPORT. Контроль соблюдения правил эксплуатации сварочного оборудования. Проведение инструктажа по технике безопасности на рабочем месте. Изучение конструкторской и производственно-технологической документации по сварочному производству Обеспечение участка квалифицированным персоналом. Обеспечение наличия и выдачи производственно-технологической документации по сварочному производства Quality control of welded structures and welded joints. Identification and elimination of the causes of violations of technological processes. Control of welding work, compliance with technological processes for the production of welded structures. Issuance of production assignments and production and technological documentation to the brigade and workers.Distribution of welders to workplaces. Monitoring compliance with labor protection requirements, industrial sanitation, industrial, fire and environmental safety, internal labor regulations. Carrying out work to improve the organization of welding production, mechanization and automation of welding processes. Execution of the daily report "DWR" DAILY WELDING REPORT.Monitoring compliance with the rules for the operation of welding equipment.Conducting a safety briefing at the workplace. Study of design and production-technological documentation for welding production Providing the site with qualified personnel. Ensuring the availability and issuance of production and technological documentation for welding production.

Прихватка деталей, изделий, конструкций во всех пространственных положениях. Подготовка изделий, узлов и соединений под сварку. Зачистка швов после сварки. Tacking of parts, products, structures in all spatial positions. Preparation of products, units and joints for welding. Cleaning of pass after welding. Welding of joints and welding of metal structures in all positions. Preparation of products, units and joints for welding. Cleaning of seams after welding. MMA welding, TIG welding, MIG / MAG welding of simple and complex metal structures and steel pipelines in all seam positions. Compliance with labor protection standards; Compliance with a strict welding regime; Participation in research work to improve technology or working methods. Control the quality of welding and eliminate all types of welding defects. Сварка стыков и сварка металлоконструкций во всех положениях. Подготовка изделий, узлов и стыков к сварке. Очистка швов после сварки. Сварка MMA, сварка TIG, сварка MIG / MAG простых и сложных металлических конструкций и стальных трубопроводов во всех положениях шва. Соблюдение норм охраны труда; Соблюдение строгого режима сварки; Участие в исследовательской работе по совершенствованию технологий или методов работы. Контролировать качество сварки и устранять все виды сварочного дефекта.

MT

ВИК НЕРАЗРУШАЮЩЕГО КОНТРОЛЬ, VT-RT- LEVEL-2

Oil and Gas Engineering, Oil and gas business

Bolt Flange Assembly, Manual/Hydraulic Tightening

Специалист по сварочного производства

INTERNATIONAL INSTITUTE OF WELDING, INTERNATIONAL WELDING INSPECTOR

Construction and operation of gas and oil pipelines and gas and oil storage facilities, Technician - mechanic

Тениз Арыстан, MT

АТТЕСТАЦИОННЫЙ ЦЕНТР ПО НЕРАЗРУШАЮЩЕМУ КОНТРОЛЮ (АЦНК), Неразрушающему контролю VT-визуальный контроль (второй уровень)

Ersai Caspian Contractor LLP ,KAZWELD. Казахстанская ассоциация сварки, International Tube Welder /tig 141

KAZWELD , INTERNATIONAL WELDING INSPECTOR (Standard level)

Ersai Caspian Contractor LLP, Электросварщик/ Arc welder

САУАТТЫЛЫК, 2 мерная графика AutoCAD /2 dimensional graphics AutoCAD