PVAS Field walkdown activities to inspect pressure vessels. Carrying out in-service inspection of equipment (heat exchangers, vessels, air coolers, air receivers, columns) to assure the mechanical integrity. Site Verification to sketch P&IDs, EIDs, Equipment Inspection Drawings and Isometric drawings from scratch wherever these drawings are not available with client. Detection of external mechanical damage to pressure vessels and nozzles. Determining the scaffolding level for CML (Condition Monitoring Locations) points. Modifying EID drawings to accessibility of scaffolds, rope access and man lift. Gathering information, operating parameters, including design, inspection summary, previous inspection history, current condition, and applicable similar service data. Filling out the checklist of pressure vessels at the plant. Sound knowledge of Safety procedures to be followed during plant walkdown. Inspecting assessing equipment condition and report the necessary repair recommendations based on code and client procedural requirements. Determining of the EID drawings for compliance. Determining of points Ultrasonic Test, Radiographic Test, Eddy Current testing Focus areas. EID PCML mark-up. Setting piping circuit. Establish access to nozzles and CML points. Determining the IS, type/mode of damage component from Corrosion study. Filling required information to Data Loader & Operation Parameters. Collecting analysis, consequence, DME lining, cracking thinning. Determining equipment grading with inspection report & inspection summary. Selecting Corrosion Rate based on Chevron procedure. Direct Line Sr Eng/Manager's auxiliary tasks. Working with ITPM, putting CML points.

Planning and carrying out fixed equipment/piping (pressure vessels, heat exchangers, storage tanks, boilers, furnaces and heaters.) inspection via on-stream risk-based monitoring programs and downtime inspection activities; Advising units on inspection program findings and recommending appropriate solutions for corrosion issues, to ensure safe and reliable operation of equipment Investigating equipment failure and recommend cost-effective methods of repair and material selection Maintaining effective working relationships and communication with business teams/units, to eliminate or minimize material and corrosion issues Monitoring latest developments in inspection/materials and corrosion technology, via inter-affiliate technology transfers, network communications and meetings Developing and update piping and fixed equipment strategy as leading indicators for reliability Maintaining effective Inspection Data Management system and filing system, including periodic updates; Providing appropriate recommendations, mitigations and timely updates on equipment degradation problems; Providing quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications; Conduct reviews and/or updates on Materials Suitability Reviews and Equipment Strategies to ensure equipment reliability; Designing and size fixed plant equipment and develop appropriate maintenance practices for the plant fixed equipment; Upgrading, designs, configures, maintains and monitors related equipment and performance; Developing systems to document and track the testing and assisting in the maintenance of the various systems; Developing engineering solutions for chronic and sporadic equipment reliability problems and working with technical, production and maintenance to implement solutions;

Understanding of Systems Completion & Turnover Process –Turnover Dossier Procedure, Punch List Procedure. Maintaining Mechanical Completion process Attending for MC/RFSU Walkdowns Providing interface between the Engineering, Construction, Quality Control, Regulatory affairs departments Uploading Redlines to e-dossier, e-walkdown. Understanding and reading of drawings: Layouts, P&ID, ISO. Ability to work with Navisworks, understanding and using modules. Provide Construction related documentation Complete Construction activities from Attachment 1 E.g. hydrotest, cleaning,alignment checks. Transition from Area to Sub System focus when 70% Construction is complete. Complete all QVDs and upload into SC Database Resolve all “A” PLIs and track closure in SC Database Submit all required Act & Protocol documents ,Submit completed MC Dossier. Conduct Preliminary (90%) & Pre MC (100%) Walkdowns in collaboration with Company. Provide Pre --/Commissioning support as requested E.g. scaffolding, general construction, technical assistance Participate in CSRs & PSSRs as required Own and facilitate Redzone meetings Coordinate WDs Coordinate with construction to complete SC priority sub systems to DAC and MC Ensure construction work aligns with SC priorities Provide schedule visibility Identification and removal of construction constraints Identify engineering & quality constraints (DCN, RFIs, TEAs, TQs, NCRs) Prioritize clean sub system handover (A PLIs) Hold individuals accountable Support system owners to achieve RFSU /OAC.0 Participate in Bluezone Meetings; provide updates on outstanding construction works. Coordinate completion of outstanding construction works through to start up Work with NavisWorks,Smart Plant 3D Calculation mechanical joints/jackets with ISO Test package packaging

Accounting for the movement of the pumped liquid. Maintenance of pumps, cooling and ventilation system, and shut-off valves. Preparation for start-up, start-up, and stop of pumps. Maintenance of electric motors, start-up control equipment, and switchgear. The technological process of pumping, the technological scheme of the pumping station and the power supply scheme; Schematic diagrams of automation systems, regulating devices and blocking; Oil sampling and chemical analysis for the control of technological processes at the stages of oil preparation; Reception and delivery of shifts, circumvention of the assigned territory, inspection of equipment, checking its condition, and familiarization with entries in the shift log on the performance of tasks for the collection, preparation, transportation of oil and gas, for the reception and release of oil, for the preparation and injection of wastewater into the system; Upgrades, designs, configures, maintains and monitors related equipment and performance;

Implementation of continuous monitoring of the implementation of existing legislation in the field of environmental protection, standards, and labor law norms related to harmful production factors; Development and control over the implementation of the environmental protection action plan; Environmental expertise in new projects and technologies; Preparation of passports, analytical control schedules, and instructions; Preparation and submission of the necessary reports to the supervisory authorities on time, calculation of the fee for the negative impact on the environment.

Introductory and primary instruction was conducted; Familiarization with the technological scheme of the Aktau GNPS oil pumping station; Familiarization with the work of the tank farm; The main equipment of tanks, types and characteristics of tanks; Familiarization with the principle of oil discharge from tank cars on a railway overpass; Familiarization with the documentation of the commodity operator; Familiarization with the device and the principle of operation of heat exchangers of group 1; Familiarization with the device and principle of operation of oil pumps; Familiarization with the device and principle of operation of treated wastewater pumps; Familiarization with the operation of household pumps; Familiarization with the work on cleaning tanks from these deposits; Familiarization with the work on the removal of under-the-counter water; Familiarization with the work on measuring the level of take-off and sampling of oil from tanks; Familiarization with the device and principles of operation of fire-fighting equipment fire extinguishers and irrigation.

Introductory and primary instruction was conducted; Familiarization with the technological scheme of the Aktau GNPS oil pumping station; Familiarization with the work of the tank farm; The main equipment of tanks, types and characteristics of tanks; Familiarization with the principle of oil discharge from tank cars on a railway overpass; Familiarization with the documentation of the commodity operator; Familiarization with the device and the principle of operation of heat exchangers of group 1; Familiarization with the device and principle of operation of oil pumps; Familiarization with the device and principle of operation of treated wastewater pumps; Familiarization with the operation of household pumps; Familiarization with the work on cleaning tanks from these deposits; Familiarization with the work on the removal of under-the-counter water; Familiarization with the work on measuring the level of take-off and sampling of oil from tanks; Familiarization with the device and principles of operation of fire-fighting equipment fire extinguishers and irrigation.

Petroleum engineering , Oil and gas business

International well control forum, Engineer of well control

Intro to Petroleum engineering, Petroleum engineering

Collegeboard, SAT score report

Collegeboard, SAT subject tests