• Monitoring, checking and making executive documentation for all welding works (pipelines, containers,assembly and erection of steel constructions, bolt tightening) according to specification. • Control Flange Management inspections. As per TCO_ GEN-SU-5108. ASME B16.20 /21. B16.5/47. ASME PCC-1. • Witnessing of welder qualifications testing and procedures qualification testing • Checking of pipe bevels/ joint fit up, checking welding parameters, checking of assembly and erection of steel construction. • Provide reports on current status of QVDs,ACTs. Validates that are applying appropriate Inspection & Test Plans (ITP) and Quality Control Procedures as well as compliance with TCO specifications and RoK standards • Oversee all mechanical underground piping installation & testing inspection in Area and ensure that the method used complies to project specifications. • Assisting construction team to ensure knowledge of all quality standards and ensure compliance to all TCO requirement & procedure and maintain quality to all system.

• Inspection of process Chemical Cleaning activities: Degreasing, Steam Blow, Air Blow, Flushing, Nitrogen Purging on the Piping systems, Separators, Drums, Pumps, Heat Exchangers, Air Coolers and Steam Turbines. • Inspection and Testing of Mechanical, Piping construction/pre-commissioning and commissioning activities as per BW KZ and Client approved Drawings, Procedures and Specifications and other contract requirements. • Provide support to the QA/QC dept on the implementation and continual improvement of company-wide QMS initiatives e.g., ISO 9001. • Attend Quality meetings, Internal and external and provide up to date status. • Witness and lead all site Inspections as per approved ITP and Procedure. • Conduct site QA/QC surveillance inspections and work site quality audits and follow up for the corrective actions. • Prepare Internal Punch lists and coordinate with site supervisor to close out all internal punch lists raised by QA/QC. • Complete Material inspections as per Client/Project requirements. • Review and maintain calibration and Test records for Testing equipment’s and other equipment's and hoses. • Issuance of nonconformance reports in conjunction with the QC and DCC Manager. • Material and Equipment incoming inspections, maintain equipment Inspection records, manufacturer documents, Тechnical passports etc. • Monitors ongoing construction/pre-commissioning/commissioning activities to ensure that installation/Tests are carried out as per client and ROK standards. • Undertake technical integrity and HSE reviews/audits, Participate in site safety management and improvement.

• Review the Project mechanical and (pre-) commissioning completion packages for accuracy, completeness, and inclusion of all documents needed by TCO specifications and local regulatory requirements • Provide timely and accurate reports for the Project on completion progress. • Preparation & Compilation of Dossier packages. • Make sure all Construction and Commissioning Completion Check Sheets are completed. • Support the development of completion tracking and reporting systems for input to the System Completions Management and produce reports accordingly. • Took a part at Walkdown to organize final construction walkdown of subsystems and area handovers in according with the Project specification, Review and prepare relevant IFC Engineering drawings and system boundaries before walkdown. • Generate Punch list/QVD reports from MCplus and present at project leadership meeting. Work closely with Regulatory Affair groups; monitor all MCPlus data base related to Subsystem MC dates; identification of Request Information Management (RIM), Non conformance Report (NCR), Surveillance Report (SR) documentation; review as built and turnover documentation submitted by the contractor for completeness and compliance. • Maintain database of required as-built documentation and monitor progress.

• Checking of pipe bevels/ joint fit up, checking welding parameters, checking of assembly and erection of steel construction. • Electrode control – particular attention paid to the control and storage of low-hydrogen electrodes. • Visual inspection of completed welds. • Preparation and signing of executive documents (Weld History, Weld Map, ITP, As-Built, Check-lists, Forms). • Checking welding works as per WPS. • General acceptance of concrete tank and Moisture Barrier application. • Take a part after welding work Membrane Sheet have been checked test by Soundness test, Mechanical test, Gas Tracer Test (NH3), Primary Barrier Global Test. • Control Flange Management inspections. As per ASME B16.20 /21. B16.5/47. ASME PCC-1. • Interfaces with the Project Construction, Turnover Engineers to support Walk Down Engineer in organizing walk downs based on Contractor MC Notifications and project schedule. • Took a part at Walkdown to organize final construction walkdown of subsystems and area handovers in according with the Project specification, Review and prepare relevant IFC Engineering drawings and system boundaries before walkdown. • Maintain database of required as-built documentation and monitor progress.

• Monitoring, checking and making executive documentation for all welding works (pipelines, containers,assembly and erection of steel constructions, bolt tightening) according to specification. • Control Flange Management inspections. As per TCO_ GEN-SU-5108. ASME B16.20 /21. B16.5/47. ASME PCC-1. • Witnessing of welder qualifications testing and procedures qualification testing • Checking of pipe bevels/ joint fit up, checking welding parameters, checking of assembly and erection of steel construction. • Provide reports on current status of QVDs,ACTs. Validates that are applying appropriate Inspection & Test Plans (ITP) and Quality Control Procedures as well as compliance with TCO specifications and RoK standards • Oversee all mechanical underground piping installation & testing inspection in Area and ensure that the method used complies to project specifications. • Assisting construction team to ensure knowledge of all quality standards and ensure compliance to all TCO requirement & procedure and maintain quality to all system.

• Monitoring, checking and making executive documentation for all welding works (pipelines, containers,assembly and erection of steel constructions, bolt tightening) according to specification. • Oversee all mechanical underground piping installation & testing inspection in Area and ensure that the method used complies to project specifications. • Control Flange Management inspections. As per TCO_ GEN-SU-5108. ASME B16.20 /21. B16.5/47. ASME PCC-1. • Checking of pipe bevels/ joint fit up, checking welding parameters, checking of assembly and erection of steel construction as per WPS. • Performing Piping Visual Inspection (Weld Joint), UG Pipe Line Checking & Pressure Testing, and ensure that all processes were done as per TCO & project specification prior to Test Package Close out. • Assisting construction team to ensure knowledge of all quality standards and ensure compliance to all TCO requirement & procedure and maintain quality to all system. • Took a part at Walkdown to organize final construction.

• Monitoring, checking and making executive documentation for all welding works (pipelines, containers,assembly and erection of steel constructions, bolt tightening) according to specification. • Oversee all mechanical underground piping installation & testing inspection in Area and ensure that the method used complies to project specifications. • Control Flange Management inspections. As per TCO_ GEN-SU-5108. ASME B16.20 /21. B16.5/47. ASME PCC-1. • Checking of pipe bevels/ joint fit up, checking welding parameters, checking of assembly and erection of steel construction as per WPS. • Performing Piping Visual Inspection (Weld Joint), UG Pipe Line Checking & Pressure Testing, and ensure that all processes were done as per TCO & project specification prior to Test Package Close out. • Assisting construction team to ensure knowledge of all quality standards and ensure compliance to all TCO requirement & procedure and maintain quality to all system. • Took a part at Walkdown to organize final construction.

• Quality control of construction and installation works, compliance with building codes and rules of technical specifications of Tengizchevroil. • Obtaining and reviewing relevant inspection documentation including drawings, ITP (Audit and Inspection Plan), TCO procedures. • Quality control of concrete works according to SNiP and GOST. • Conducting inspections on earthworks. • Witnessing of welder qualifications testing and procedures qualification testing. • Inspection welding works in shop. • Checking of pipe bevels/ joint fit up, checking welding parameters, checking of assembly and erection of steelconstruction. • Electrode control – particular attention paid to the control and storage of low-hydrogen electrodes. • Visual inspection of completed welds. • Prepare and signing documentations (Weld History, Weld Map, ITP, As-Built, Check-lists, Forms). • Certification of welding and brazing specialists according to approved company procedures. • Prepare of documents as required by TCO. • Completion Job Pack.

• Checking of pipe bevels/ joint fit up, checking welding parameters, checking of assembly and erection of steel construction. • Fill in necessarily check lists and act of hidden works. • Conducting of technical documentation, delivery of object, control work in accordance with the projectrequirements respecting. • construction installation works (storage tank, SGO(separator of gas from oil ), GLCS (The Gas LiftCompressor station)

Промышленной инженерии имени А.Буркитбаева, Машиностроение(инженер механик)

YKK Kazahstan, Training Courses NCOC

YKK Kazahstan, Training courses Ncoc

YKK Kazahstan, Training Center

YKK Kazahstan, Training Center

YKK Kazahstan, Training Course

Kran Service LLP, NDT

ACNK LLP, NDT