Responsible testing laboratory of non-destructive testing for the development, implementation and operation of QMS, management of QMS documentation, updating of documents, organization of equipment verification and certification of test equipment. Responsible with contact the National Accreditation Center (NCA)

Checks the procedure for updating the latest version Issuing Non-conformance Reports (NCRs) to the Project for disposition. Assist providing solutions. Checking all documentation from construction drawings according to latest revision and if have deviation sending drawings to engineering department for the approval. Сoordinating the computer operator and quality officer. Check last version drawings and project documentation and their to share with our Quality Control team. Coordinate all activity report for Civil, Mechanical outfitting, Post tension, Welding, Painting and coating according to the ITP & QCP and checking signed or not by Company. I help to Project Quality Engineer and Project Quality Manager at procedures and equipment calibration to send a laboratory verification and metrology timely. Checks the procedure for updating the latest version Issuing Non-conformance Reports (NCRs) to the Project for disposition. Assist providing solutions. Checking all documentation from construction drawings according to latest revision and if have deviation sending drawings to engineering department for the approval. Сoordinating the computer operator and quality officer. Check last version drawings and project documentation and their to share with our Quality Control team. Coordinate all activity report for Civil, Mechanical outfitting, Post tension, Welding, Painting and coating according to the ITP & QCP and checking signed or not by Company. Support the Project Quality Engineer and Project Quality Manager at procedures and equipment calibration to send a laboratory verification and metrology timely. Planning and allocating QC functions to the various area of the project, ensure coordination of assigned personnel. Ensure the correct application and, whenever necessary, the update of site Quality Control Plans/procedures. Ensure that inspection/control/test reports are verified, recorded, filed and traceable. Coordinating punch List items being registered and addressed properly with all necessary data. Punch List item closing and reports issuing. Planning and allocating QC functions to the various area of the project, ensure coordination of assigned personnel. Review Quality Control Plans; ensure that the tests, controls and inspections are carried out according to Quality Control Plans/Inspection Test Plans and that personnel have access to all required project documentation. Check the documents certifying the tests, controls and inspections carried out and ensure their orderly collection and management, mechanical completion included Ensure proper Non-Conformity detection and recording, as well as relevant corrective actions implementation Ensure the preparation of the Quality section of the final dossier. In case of subcontracted activities, review and receive the QC section of the dossier Ensure that inspection/control/test reports are verified, recorded, filed and traceable Support the Project Quality Manager / Quality Control Manager in the management of lesson learned process. Reports Project QC information and data to Project Quality Manager / Quality Control Manager by means of Corporate Methodologies and tools. Preparation, review, updating and distribution of the Project Quality Plan and Issue of Project Quality procedures, Project Inspection, Test Plans and forms. Evaluation of Suppliers/Sub-contractors’ Quality systems. Coordination and supervision of activities relative to the collation of the “Project Record Books”. Determining and reporting to the Project Manager the principal causes of quality loses. Maintain updated status of each Test Pack in Test Pack Data Base file and distribute status to all involved persons.

Collection of reports on daily basis from respective methods of NDT lab. Ensuring reports liability towards clerical errors and technical errors. Rising nonconformity against reports imperfection and fault and take necessary actions. Control and monitor client approval process and document submission to the client. Controlling/assisting in workflows management and document distribution. Assisting the direct Supervisor/Coordinator in all activities relevant to the proper filling and traceability of all QA/QC documents and records. Preparing QA/QC dossiers to satisfy milestone target dates. Assuring the entire documents of client approval and trace nonconformity on reports. Updating signed documents in web-based document sharing tool – Sharepoint. Preparation of QA/QC documents and maintain track record of every process Preparation of written reports documenting surveillance activities. Issuing Non-conformance Reports (NCRs) to the Project for disposition. Assist providing solutions. Issuing inspection (surveillance) reports, non-conformance reports and inspection (surveillance) release reports to appropriate project personnel and coordinates the disposition of nonconformities. Supervision of Civil work and other mechanical work, inspection of incoming control under the control of the register. Every separately Сhecking all types of discipline according to QCP and ITP according to the section each QC code corresponding to the form Checking reports on Civil work, Mechanical outfitting, Painting / Coating and Post Tension according to QCP and ITP. Checking all documentation from construction drawings according to latest revision and if have deviation sending drawings to engineering department for the approval. Prepara all the reports for the upload in the PCOS (Project Completion System) Monitoring of each project documentation for new changes is agreed with the customer in order to transfer this to our employee in time for our employees to use the latest version. I coordinate the computer operator and quality officer. PROJECT ARCTIC LNG 2 The project includes the construction of three LNG trains, with a capacity of 6.6 mtpa of LNG each, and at least 1.6 mtpa of stable gas condensate. The total LNG capacity of the three trains will be 19.8 mtpa. The project employs an innovative construction concept using gravity-based structures (GBS). OOO Arctic LNG 2 is the operator and owner of all the assets. The Utrenneye field is the resource base for Arctic LNG 2. The field is located in the Gydan Peninsula in YNAO approximately 70 km across the Ob Bay from Yamal LNG. In 2018, we completed the front-end engineering design (FEED) and started site preparation, construction of early phase power supply facilities, production wells drilling, and construction of the quayside. The participants of Arctic LNG 2 approved a final investment decision (FID) for the project in September 2019. Capital expenditures to launch the project at full capacity is estimated at $21.3 billion equivalent. The GBS design concept as well as extensive localization of equipment and materials manufacturing in Russia will allow to considerably decrease the CAPEX per ton of LNG produced under this project. This will ensure a low cost structure of products and maximum competitiveness across the LNG markets.

Quality Officer NDT Laboratory Collection of reports on daily basis from respective methods of NDT lab. Ensuring reports liability towards clerical errors and technical errors. Rising nonconformity against reports imperfection and fault and take necessary actions. Generate filing with the respective divisions and make archiving by digital and print. Initiate transmittal to get approval of certification department for client verification. Control and monitor client approval process and document submission to the client (work with transmittals). Controlling/assisting in workflows management and document distribution. Assisting the direct Supervisor/Coordinator in all activities relevant to the proper filling and traceability of all QA/QC documents and records. Preparing QA/QC dossiers to satisfy milestone target dates. Assuring the entire documents of client approval and trace nonconformity on reports. Updating signed documents in web-based document sharing tool – Drop Box. Follow up and input data in company’s FMS system. Tracing production backlog and update company internal data management record. Prepared electronic document templates. Checked incoming documents for readiness prior to processing. Preparation of QA/QC documents and maintain track record of every process. Establishing and managing effectively the document control planning system in order to support the project development, ensuring the document availability. Setting up the document control system according to company and project procedures and in compliance with contractual requirements, ensuring that the document control philosophy is clear and shared. Knowledge of requirements for the use of personal protective equipment and site safety rules. Future Growth Project: The Future Growth Project (FGP) / Wellhead Pressure Management Project (WPMP) is an expansion of Company’s existing facilities located in Tengiz, at Western Kazakhstan. The FGP/WPMP project is applying a modular construction design with Pre-assembled (Process and Utility) Units, namely the PAUs, and Pre-assembled (Pipe) Racks, namely the PARs, which are collectively referred to as Modules. The Modules are to be fabricated and tested outside the Area of Operations and transported to Tengiz in the Area of Operations for their final installation and Hook-up.

Quality Specialist and assistant Project Quality Manager Assisting the direct Supervisor/Coordinator in all activities relevant to the proper filling and traceability of all QA/QC documents and records. Preparing QA/QC dossiers to satisfy milestone target dates. Preparation of QA/QC documents and maintain track record of every process. EPC PROJECT AgipKCO – Agip Kazakhstan North Caspian Operating Company N.V.: The Scope of Work includes detailed design, for EPC2, EPC3 and EPC4 Topside Production Manifold Modules, procurement of materials, fabrication, load-out and transportation of EPC2 and EPC3 Topside Production Manifold Modules (KASHAGAN Field). Engineering, Procurement and Construction of n.4 Instrument Buildings. Detail design developed by Renco include Civil/Architectural Finishing Works and AC/electrical/instrumentation/F&G Systems. The concrete shell of the buildings has been calculated in order to be blast resistant, including external blast doors and dampers. The buildings have been designed for a classified area Zone 1 IIB T3 and hard environmental conditions (max ambient temperature +45°C / min ambient temperature -36°C). The scope of work included commissioning and start-up.

Геология и разведка месторождений полезных ископаемых

Bureau Veritas, PR328: QMS ISO 9001:2015

Quality Management Centr , ISO 9001-2015, 14001-2015, 45001-2018

Quality Management Centr , ISO 17025-2019