Job Responsibilities: - Understand and comply with the customer’s technical specifications, standards, and as-built documentation. - Possess extensive experience in applying fireproofing materials such as PITT CHAR, CHARTEK 7/1709, FENDOLITE M2, TG. - Possess extensive experience in applying coatings from manufacturers like Hempel, Jotun, International, PPG, Carboline, Belzona. - Have experience in the construction and maintenance of onshore/offshore areas, process pipework, pipelines, and vessels. - Prepare ITP & MS in accordance with the specifications before starting work. - For large-scale projects, calculate manpower, materials, and equipment. - Discuss with customers to select the most cost-effective coating for the company. - Work closely with representatives from manufacturers such as Hempel, Jotun, International, PPG, Carboline, Belzona. - Perform incoming inspection of uncoated pipes, determining the corrosion class according to applicable standards. - Check surface preparation (roughness, cleanliness, dust, abrasive metal cleanliness, air quality check). - Visually inspect coated pipes, identify repair areas, determine causes, and their elimination. - Check coating thickness according to applicable standards. - Verify applied materials according to manufacturer recommendations and customer specifications. - Perform dielectric continuity checks (holiday test), with the ability to set appropriate voltage. - Control the quality of repair work. - Perform final inspection and marking of pipes according to the quality assurance plan. - Work closely with the Quality Engineer. - Prepare documentation of the work performed. - Calculate the scope of work and the amount of materials.

inspection of surface preparation, coating and inspection of each coating layer - check all documentation and reports; - verification of material certificates and verification of received materials ; ; - provide timely reports to senior management (weekly, monthly, quarterly reports on the results of monitoring, study and analysis

Coating inspector in the Protective Coatings Shop. Three-layer polyethylene (3PLE), three-Layer polypropylene(3LPP), single-Layer and two-layer surfaced epoxy coating of pipelines (SL FBE & DL FBE), Internal coating of pipelines (Internal coating). April 2018 • Performing input monitoring of exposed pipes. * Determination of the degree of corrosion in accordance with the applicable ISO 8501-1: 2007 standard. • Testing tests in the input zone: salt test, magnetic test. • First of all, I check the state of the environment, if it does not comply with the TCO procedure, especially in winter, I use heaters to preserve the environment according to the specification. June 2018 • Inspection of surface preparation • I ask the inspector to be present during the tests. • I usually perform a blotter test on compressed air, a dust test before and after the jet treatment. • Also check the surface profile and abrasive material before applying paint. January 2019 * Checking the dry film thickness in accordance with the current standard. * Detection of micro-holes. Inspection of repair sites. • Final inspection and application of the stencil in accordance with the approved ITP. Job responsibilities: * Know and understand the customer's specification, standards, and execution documentation. * Ability to understand the quality assurance plan. ● Verification and calibration of testing instruments. ● Inspection for humidity and temperature in the Shop. ● Monitoring and daily inspection of warehouses for storage of coating materials. ● Implementation of the input control is not covered with tubes. Determination of the corrosion class according to applicable standards. ● Checking the surface preparation (roughness, degree of cleaning, dustiness, cleanliness of the abrasive material, air quality check. ● Checking the applied material according to the manufacturer's recommendations and the customer's specification. ● Visual inspection of covered pipes, identification of repair areas, ability to identify causes and eliminate them. ● Checking the coating thickness according to applicable standards. ● Dielectric continuity test (holiday test). Ability to adjust the appropriate voltage. ● Quality control of repairs. ● Final inspection and marking of pipes according to the quality assurance plan. ● Working closely with the quality Engineer. * Preparation of documentation on the work done. ● Relationship with the customer's representative. Discussion of results. ● Performing destructive and non-destructive tests according to applicable standards. ● Close cooperation with the production and testing laboratory for laboratory testing of the coating material and applied coating. ● Monitoring of loading and unloading operations to protect the coated pipes from defects during transport. * Ability to work in a team.

финансы и кредит, финансист

ACG Training, BGAS-CSWIP Painting Incpector Grade ||