Project NCOC " Long Term Slug Catcher in situ Option" ( Capital repair) Project Control Department • Filled and control Activity progress • Colloborating with Engineering team, Material department, Construction team • Review project specs and drawings

Responsibilities: • Verification of all documents included in the Dossier (Certification Database). • Close cooperation with engineers and managers for the correct execution of check sheets and the project of work for the assembly of the Dossier and further commissioning. • Scanning The Project Transfer Documentation. • Working with the documentation for the C- check sheet (select). • Aware of the priorities and schedules of work on the project. • Responsible for the control, verification and turnover of finished documentation in all disciplines. • Develops ITR source matrices for ready-made documentation required for construction, commissioning and commissioning (checklists, acts, contractor forms, etc.). • Receives and reviews ready-made documentation. Works with contractors to eliminate comments in the finished documentation. • Checks and uploads act to iPIMS. • Works with contractors to speed up the process of submitting project documentation. • Supports and advises TCO contractors and construction specialists on all aspects of the preparation of the project documentation package. • Provides information to the SC manager about the effectiveness of contractors in relation to documentation as it is created. • Optimization of work processes and participation in the preparation of turnover procedures. Assistance in the processes of signing MC, RFSU and RFO certificates. • Updating the IMDB and TTM matrices. Loading, assembling and completing Redlines with the latest version of changes for commissioning for each subsystems

- Creation and releised MTO according to FLUOR and Milemarker; Creation and releised IWP, estimation Man Hours, human resources, various machines and mechanisms; Interaction with planning; Estimation some of the volumes of various construction works and metal structures; Interact w of ith other Departments and stakeholders to review , discuss project scope of work and estimate basis; Develop and verify MTOs, eguipment and bulk quantities against P&IDs and drawings; Review estimates to ensure accuracy and completeness with defined scope of work; Prepared detailed estimates for different construction and metal fabrication projects including but not limited to industrial construction, civil projects, oil&gas; Assist project management and contracting personnel; Support technically in review of design packages and drawings.

Drawing up budget documentation; design of PIR estimates; Conducting budget documentation through the GOSEXPERTIZA;

Responsibilities: TCO - Future Growth Project/Well Head Pressure Management Project (FGP/WPMP) Gathering and injection System. Production and Gas Injection Well Pads", Integrated Operations Control Centre • Coordinate with client QA/QC, regulatory authorities, (RA, Technical Supervision, Authorship supervision) to reach maximum compliance for project including AFC drawings, Vendor Drawings, QVDs, ACTs, Construction logs/ Prikazes/Qualification certificates, Emission Permits, required documents according to GASK, client Talon according to RoK Regulatory requirements. • Coordination with client Regulatory Authorities, and response to issues raised by client and RoK Authorities • Maintaining tools for RA tracking and reporting process under project scope, including RA registers, matrices • Verify and maintain material certifications, employee certification’s, Orders, equipment certifications as per RoK requirements. • Prepare and maintain material certification Matrix as per Project RA procedure, verify RoK material certifications. • Conduct RA and Quality surveillance checks/Weekly Internal audits according to approval from Quality manager at assigned sites regarding proper management of documentations (conclusions, declaration of conformity, Drawings, Acts, logbooks, protocols, registers required as per client RA procedure and Turnover procedure, RoK, SNiP, GOST, VSN, SN standards etc.) to compliance with Client and RoK laws and norms. • Notify and Coordinate with Company site Quality Engineer, Client Quality Inspector, Client Technical supervision to complete ACT, QVDs wherever required • Interfacing with project departments to discuss the implications of the design changes and RoK requirements to the project with regards to Construction, commissioning, Turnover and Acceptance process • Interfacing and coordination with multiple other disciplines in the company and with client day to day basis • Attend Project Management meetings to provide regulatory affairs support as required. • Participate / conducting of facilities acceptance process and manage the process of obtaining declaration on compliance from Subcontractors, Conclusions on Quality and Design Compliance from Technical and Authorship Supervision Reps, Acts of Acceptance of completed Facilities. • Preparation of work logs, registration and writing of verification logs work with quality certificates, work with permits in conjunction with the GASK. work wit loop with quality certificates, work with

Responsibilities: • Issue and execution of as-built technical documentation on mechanical and piping, electrical and general construction works in accordance with the requirements of the current legislation, design decisions, procedures and methods of production of works and customer's procedures Completion of the log of production of works and special logs. • Verification of the availability of the required certificates of conformity, sanitary and epidemiological certificates, fire safety certificates, application permits, technical passports and other documents confirming • the quality of all materials arriving at the construction site. • Registration and monitoring of the as-built technical documentation in the database. • Determination of the readiness of the as-built technical documentation and provision of the necessary information to the company management and the Customer to determine the status of documentation readiness Coordination of all issues that require prompt resolution with a technical manager. • According to the instructions of the company’s managers and the Customer, participated in meetings with contractors to discuss current issues within competence. • To execute labour duties in accordance with the legislation of РК, labour, collective agreements and acts by employers • To participate in development, introduction and perfection of control system quality in Company to analyse information about the indexes of quality on the different stages of implementation of works, to take measure on prevention of providing of works falling short of to the set requirements and norms.

Head of Production Technical Department Drawing up estimates, certificates of work performed, certificate f3, drawing up of acts for commissioning the facility, checking and accepting the quality of work for contractors;I read the ability and understand construction drawings; I generate the ability MTO’s (Material Take Offs) on all trades; I track able commodities during the construction phase, i.e.: Earthworks, Civil, Concrete, Structural, Architectural, Mechanical, Piping, Electrical and Instrumentation works.; Liaise with Planners and construction teams in order to ensure proper measure is undertake, as well as accurate quantities is installed per commodities; Participate in the development of progress databases or calculation sheets based on Contractual requirements;

Preparation of design estimates for various profiles, drafting of the M-29 form (write-off of materials), drawing up estimates for projects and defects, drawing up of acts of form 2, drawing up a form-reference number 3. Reading and fixing projects in Autocad.Mastering the program of the RSNS RK 2015. (resource method of compiling the estimate documentation for the ABC-4 program; I read the ability and understand construction drawings; I generate the ability MTO’s (Material Take Offs) on all trades; I track able commodities during the construction phase, i.e.: Earthworks, Civil, Concrete, Structural, Architectural, Mechanical, Piping, Electrical and Instrumentation works.; Liaise with Planners and construction teams in order to ensure proper measure is undertake, as well as accurate quantities is installed per commodities; Participate in the development of progress databases or calculation sheets based on Contractual requirements;

Experience: Preparation of estimate documentation (compilation of local estimates, summary estimates, accumulation and defect statements, certificates of work performed, certificates of work performed (form No. 3), signing of acts of the state and working commission for the commissioning of the construction site, verification and confirmation of volumes at the very building object; I read the ability and understand construction drawings; I generate the ability MTO’s (Material Take Offs) on all trades; I track able commodities during the construction phase, i.e.: Earthworks, Civil, Concrete, Structural, Architectural, Mechanical, Piping, Electrical and Instrumentation works.; Liaise with Planners and construction teams in order to ensure proper measure is undertake, as well as accurate quantities is installed per commodities; Participate in the development of progress databases or calculation sheets based on Contractual requirements;

drawing up of acts of the working and state commission, drawing up of estimate documentation for different profiles, drawing up of M-29 form (write-off of materials), drawing up of executive technical documentation, drawing up estimates for projects and defects. Preparation and timely delivery of tender documents; I read the ability and understand construction drawings; I generate the ability MTO’s (Material Take Offs) on all trades

Faculty "Engineering", Specialty: "Industrial civil engineering" , engineer-builder

GASK , Certification of the cost estimator GASK (city), Engineer-Estimator